USITT 2012 Stage Expo
March 29th – 31st, 2012
www.usitt.org/Conference

Exhibit Hours:
Thursday, March 29th 11:00 a.m. – 5:30 p.m.
Friday, March 30th 11:00 a.m. – 5:30 p.m.
Saturday, March 31st 9:30 a.m. – 2:00 p.m.

www.usitt.org/Conference

NAMM Show 2012
January 19th – 22nd, 2012

Exhibit Hours:
Thursday, January 19th 10 a.m. – 6 p.m.
Friday, January 20th 10 a.m. – 6 p.m.
Saturday, January 21st 10 a.m. – 6 p.m
Sunday, January 22nd 10 a.m. – 5 p.m.

www.namm.org/thenammshow/2012

LDI 2011 Show
October 28th – October 30th, 2011
Orange County Convention Center
9800 International Drive
Orlando, FL

Booth #1606

Oct. 28th              10am – 5pm
Oct. 29th              10am – 5pm
Oct. 30th              10am – 2pm

www.ldishow.com

131st AES Convention
October 21st – 23rd, 2011
Jacob Javits Center
655 West 34th Street
New York, NY

Oct. 21st              10am – 6pm
Oct. 22nd             10am – 6pm
Oct. 23rd              10am – 4pm

www.aes.org

SkyCub

The SkyCub™ is a low profile hoist for Tracklight systems.

We are in the Hall Stage Ltd Stand 2-R28

The Dates:
Sunday 11 September – Wednesday 14 September 2011
The Venue:
Earls Court Exhibition Centre
London, SW5 9TA
www.eco.co.uk
Opening Times:
Sunday 11 September: 10am – 6pm
Monday 12 September: 10am – 6pm

Tuesday 13 September: 10am – 6pm
Wednesday 14 September: 10am – 5pm

Banner

• The acouStac® Banner consists of two parallel fabric Panels made up of individual horizontal Segments held together by Stackers.  The stackers separate the two fabric panels at a constant dimension (depth) over the full height and width of the banner.  The paired fabric panels shall be available with inner chambers of 3” or 6” wide formed by the stackers and 6”, 11”, 15” or 24” tall formed by the fabric segments.  The panels are made of either 24oz IFR Velour or FR Wool Serge.  The panels are flat with 0% fullness.
• The individual fabric segments are removable to allow cleaning and repair without removing the entire banner.
• The acouStac® banner is certified by an independent laboratory insuring that the banner has been tested in accordance with the “Sound Absorption Coefficient by Reverberation Room Method” (ASTM C423-07).

Motorized Line Shaft Hoist System

• The acouStac® banner is retracted and deployed via a motorized lineshaft hoist. The hoist shall consist of a gearmotor and a full length drive shaft supported by self aligning flange blocks.
• The acouStac® banner retracts by means of lifting bands. The lifting bands attach to drums positioned along the width of the banner and connect to the lifting plate at the bottom of the banner. The lifting bands are stainless steel with a design factor of no less than 8:1.
• A heavy duty aluminum frame with top and side panels supports the hoist motor, the drive shaft, drums and the banner. The frame is constructed in a manner that allows easy access to the motor for servicing. Access to the banner is also available should the entire banner require removal.
• The acouStac® Hoist Motor is a 480 / 208v 3 phase gearmotor. The gearmotor capacity includes a 1.25 safety factor. The system is capable of fixed speeds of up to 20/fpm. Four position limit switches include both up and down normal travel and over travel protection. The gearmotor is equipped with a fail-safe brake, rated for 200% of the hoist capacity that is engaged unless the controller disengages it for raising or lowering the load. The motorized lineshaft hoist is sized to accommodate the specified banner.
• The acouStac® Motor Starter Cabinet may be mounted on the hoist frame or wall mounted in a remote location.

acouStac® Control Systems
The acouStac® control system is available with the following options:

• Push Button Up/Down Control of a Single Channel.
• Push Button Up/Down Control of Multiple Channels ( up to 6 channels ).
• Push Button 3-position Control – Up/Down/Intermediate of Single or Multiple Channels (up to 6).
• Touchscreen Control with Multiple Channels, Multiple Presets, and Positioning Feedback.

An individual channel controls one or more acouStacs® simultaneously. The number of acouStacs® that may be assigned to a channel is determined by available building power and local safety protocol.

Finishes

• Frame and stackers are mill finish aluminum.
• Frame enclosure panels are grey.
• Stainless steel bands are self-colored.
• Fabric colors may be custom or selected from a standard color chart.

acouStac® options include:
Power & Controls

• Fixed speeds up to 100/fpm.
• Variable speeds of up to 180/fpm.
• 120v single phase inverter for max 1 HP applications.
• International power inputs.
• Manual Drive/Hand Operation for banners up to 100 sf with 12 ft height limit.

Banner Size

• Custom banner width or height up to 60 ft.
• Custom segment height.
• Multiple banners per motor.
• Finish & Enclosures.
• Powdercoat frame to black or color selection.
• Anodize stackers to black or color selection.
• Frame enclosure panels available grey, black or color selection.
• Alternate fabrics for non-acoustic applications.
• Custom plywood enclosure around frame and retracted banner.
• Bottom enclosure panel for millwork attachment.

acouStac® Model #s
3V6 6V6
3V11 6V11
3V15 6V15
3V24 6V24

*V* = velour acouStac® chamber size (e.g. 3V6 is a 3” wide stacker with 6” tall velour segments)
*W* = wool acouStac® chamber size (e.g. 3W6 is a 3” wide stacker with 6” tall wool segments)
3, 6 prefix = stacker width
6,11,15,24 suffix = segment height
-10 x 20 = 10 ft wide x 20 ft tall banner (e.g. 3V15-10×20)
-B2 = 2 banners per motor (e.g. 6V15-B2)
-H = hand-operation (e.g. 3V11-H)
-ENC = enclosure (e.g. 6V15-ENC)

• 24oz. FR wool fabric is available in black or custom colors.
• Seamless fabric surface up to 59” wide Mill finish aluminum frame with grey side panels encloses the motor and fabric tube. Frame design allows access to the motor for routine maintenance.
• Available with bottom closure panel for millwork attachment.
• Ships to the site fully tested and assembled.
• Standard motor is 1Ф 120vac.
• Standard travel speed is 18 FPM.
• Controls options include:
  Pushbutton single channel and multi-channel Touchscreen multi-channel with positioning.
• Custom lengths are available.
• Manual option available.
• Standard ceiling or wall attachment hardware included.